Laminate
flooring needs to be cleaned regularly in order to prevent them from getting
warped or scratched. Using harsh cleaners can create streaks or damage the laminates. Cleaning with a dry
mop should be done regularly. You can use warm water or mild cleaners for
intense cleaning. Here are some tips to
clean laminate floors.
1. General
Cleaning:
Regularly
sweep the floor with a dry mop or use a vacuum with a soft brush attachment.
Even though laminate sheets
used flooring is fairly scratch resistant, excess dirt, debris and hair can
cause scratches, hence regular cleaning is required. Sweep in the direction
that the laminate tiles were laid, as you can pick up any debris that falls
between the grooves of laminate flooring pieces. Never allow any liquid to sit
on the floor for prolonged period as it can damage the protective wear layer of
the flooring.
2. Hot
Water:
You can wash
the entire floor laminates with hot water every few months. Hot water is one of
the best ways to clean as it does not leave streaks and is least likely to
damage the protective layer since water is the mildest cleanser possible. Let
the floor air dry or use a dry cloth. Don't use an abrasive cloth.
3. Vinegar:
Vinegar is
too abrasive to be used in its pure form, it must be combined with water. Add
60 ml of vinegar in a 30-32 oz spray bottle and fill the rest bottle with plain
water. Spray the solution onto the
laminate sheets on the floor a little at a time and wipe off immediately with a
dry cloth. Allow the floor to air dry.
4. Gentle
Soap:
You can add
a mild liquid dish detergent or baby shampoo in hot water. Do not use scented
or dyed dish detergent as it can create streaks. Soak a sponge in the solution
and clean. Wipe the floor and then let it dry.
5. Removing
Stains:
• To remove blood stains, spray window
cleaner and wipe it with a warm damp cloth.
• Scrap away chewing gum with a plastic
knife. Do not use a metal knife as it is rough.
• Soda, wine, crayon marks can be
removed with a mildly damp cloth.
• Apply ice pack to the greasy area on
the laminates and leave it until the grease hardens. Scrape the frozen grease
off with a plastic knife.
No comments:
Post a Comment